Heat Treatment Furnace Circulation Fans
SLINORD manufactures heat-resistant alloy circulation fan impellers for heat treatment furnaces. Cast from Cr-Ni heat-resistant alloys by investment casting, our fan impellers ensure uniform temperature and atmosphere circulation inside pit furnaces, carburizing furnaces, annealing furnaces, and quenching tanks — delivering consistent heat treatment results and extended fan service life at temperatures up to 900–1000°C.
Why Circulation Fans Matter
In heat treatment furnaces, hot gas or atmosphere must be circulated continuously to maintain uniform temperature throughout the chamber. A cast alloy circulation fan mounted on the furnace roof or side wall drives this flow. Because the fan operates directly in the high-temperature furnace atmosphere, the impeller must be cast from heat-resistant alloy with precise blade geometry to resist thermal deformation, oxidation, and vibration at operating speed.
Key Features
High-Temperature Strength
Cr-Ni heat-resistant alloys retain strength and resist creep at 900–1000°C continuous operation.
Dynamic Balance
Cast impellers are dynamically balanced to minimize vibration and bearing wear at operating RPM.
Precision Cast Blades
Investment cast blade profiles deliver accurate airflow with minimal turbulence and noise.
Oxidation Resistance
High Cr-Ni content resists scaling and carburization in furnace atmosphere over long campaigns.
Product Gallery
4-Blade Centrifugal Impeller
Curved-blade fan with tapered shaft — common for pit furnace circulation.
6-Blade Axial / Radial Fan
Straight radial blade impeller for high-volume gas circulation.
Backward-Curved Impeller
Double-inlet backward-curved blade fan for efficient airflow.
Installed in Pit Furnace
Large circulation fan mounted on top of a pit-type heat treatment furnace.
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Name | Heat Treatment Furnace Circulation Fan / Impeller / Fan Wheel |
| Manufacturing Process | Investment casting (lost-wax) or sand casting → machining of bore/shaft → dynamic balancing |
| Standard Materials | Cr25Ni20; 253MA (1.4835); 310S equivalent; 1.4848; 1.4852; HK40 |
| Operating Temperature | Up to 900–1000°C (depending on alloy and furnace atmosphere) |
| Impeller Types | 4-blade centrifugal, 6-blade radial, backward-curved, double-inlet, axial fan |
| Typical Diameter | Ø 200 – Ø 1200 mm (custom per furnace drawing) |
| Shaft / Bore | Tapered bore or straight bore per motor shaft; keyway / set screw per drawing |
| Balancing Grade | Dynamic balancing to G6.3 or G2.5 per ISO 1940 (custom spec available) |
| Furnace Types | Pit furnaces, carburizing furnaces, annealing furnaces, normalizing furnaces, quenching tanks, atmosphere furnaces |
| Industries | Heat treatment shops, automotive, aerospace, bearing manufacturing, tool & die |
| Certification | ISO 9001; material test certificate per EN 10204 3.1; balancing report |
Applications
- Pit-type carburizing and carbonitriding furnaces
- Bell-type annealing furnaces for steel and copper coils
- Box-type and shuttle-type normalizing / tempering furnaces
- Atmosphere-controlled brazing and sintering furnaces
- Quench tanks and fluidized bed furnaces
- Continuous roller-hearth and mesh-belt furnaces
Why Choose SLINORD Furnace Fans?
- Matched to your furnace: Send us your fan drawing or old impeller — we match diameter, blade angle, bore, and rotation direction.
- Dynamic balanced: Every impeller is balanced before shipment — no vibration issues on install.
- Material per atmosphere: Cr25Ni20 for general, 253MA for sulfur/carburizing atmospheres, 1.4852 for higher temperature.
- Replacement cross-reference: We manufacture drop-in replacements for most furnace brands' circulation fans.
- Export packaging: Protected, strapped, and packed for sea freight with MTC and balancing report.
Need a Custom Heat Treatment Furnace Circulation Fans?
Send us your drawing, part sample, or furnace dimensions — our engineers will recommend the optimal cast or fabricated solution and quote within 2 working days.