Pit Furnace Fixtures and Hanging Racks
SLINORD manufactures pit furnace fixtures by lost foam casting (EPC) — vertical hanging racks, perforated support posts, multi-tier cages, and circular hearth grids for pit-type heat treatment furnaces. Made from heat-resistant Cr-Ni alloys, these fixtures carry long shafts, rods, tubes, and rings vertically during carburizing, nitriding, quenching, and annealing cycles up to 1100°C. The foam pattern is vaporized during pouring, yielding a sound, seam-free casting with integrated lifting eye, hanging holes, and grid hearth — ideal for large, heavy-duty furnace hardware.
Key Features
Integral Lifting Eye
Reinforced cast lifting eye at the top — load-rated for crane hoisting of the full fixture plus workpiece load into and out of the pit.
Perforated Hanging Post
Vertical post with a pattern of cross holes — hang long shafts, rods, and tubes on pins or hooks at adjustable heights.
Circular Grid Hearth
Radial / hexagonal open grid base sits on the furnace bottom — uniform atmosphere and gas flow around the entire load.
Heavy-Duty Heat Resistance
Cast HK / HP / 1.4848 / 1.4852 austenitic alloys resist creep, oxidation, and sagging under long vertical hangs at 1000–1100°C.
Product Range
Perforated Hanging Post
Vertical cylindrical post with cross holes, lifting eye, and circular hexagonal-grid base — for hanging shafts and rods.
Multi-Tier Cage Rack
Top and bottom grid plates joined by support posts — two-tier loading for rings, discs, and medium parts.
Circular Radial Hearth Grid
Large circular cast support tray with radial interlocking ribs and center hole — the bottom hearth of the pit furnace.
Star Base Furnace Fixture
Lifting from the middle is safer, and the hexagonal star-shaped design of the base ensures stability and load-bearing capacity
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Name | Pit Furnace Fixtures / Vertical Hanging Racks / Hanging Posts / Pit Furnace Hearth Grids |
| Manufacturing Process | Lost Foam Casting (EPC): EPS foam pattern → refractory coating → dry sand vibration molding → pouring (foam vaporizes) → shakeout → shot blasting → inspection |
| Standard Materials | ASTM A297 HK / HP / HU; DIN 1.4848 (G-X40CrNiSi27-4) / 1.4852 (G-X40CrNiSi25-21); 35Cr24Ni7SiN; 25Cr20Ni |
| Max Working Temperature | Up to 1100°C (2010°F), depending on alloy and load condition |
| Furnace Type | Pit-type / vertical shaft / well-type carburizing, nitriding, quenching, and annealing furnaces |
| Casting Tolerance | GB/T 6414 CT8–CT10 (lost foam casting class); CNC machining on locating surfaces on request |
| Post Hole Pattern | Round cross holes, adjustable spacing — for hanging pins, hooks, and racks |
| Hearth Grid Pattern | Hexagonal / radial / interlocking — open area ratio optimized for gas circulation |
| Typical Dimensions | Custom-built to furnace inner diameter (Ø300–Ø2000 mm); post height 500–3000 mm |
| Lifting Eye Design | Integral cast eye, load-rated for the full fixture + workpiece weight |
| Surface Finish | As-cast + shot-blasted |
| Heat Treatment Processes | Pit carburizing, carbonitriding, nitriding, gas quenching, annealing, normalizing, stress relieving |
| Certification | ISO 9001; EN 10204 3.1 material mill test certificate |
Applications
- Long automotive transmission shafts, axle shafts, and drive shafts — vertical carburizing / quenching
- Bearings, rings, and gear blanks — pit furnace gas carburizing and carbonitriding
- Tool and die steels, long cutting tools, and shafts — pit type annealing / normalizing
- Stainless steel tubes and pipes — vertical bright annealing in pit furnaces
- Fasteners and high-strength bolts — pit furnace quenching and tempering
- Aerospace landing gear and long structural components — vertical heat treatment to minimize distortion
Why Choose SLINORD Lost-Foam Pit Furnace Fixtures?
- One-piece large castings: Lost foam process produces large, integral fixtures without parting-line flash or joint seams — post, eye, and hearth cast as one body.
- Designed for vertical load: Post wall thickness and eye section are calculated against actual hanging load and creep temperature — no mid-cycle sagging.
- Optimal gas flow: Open grid geometry and side perforations ensure uniform carburizing / nitriding atmosphere around every part.
- Long service life: HK / HP cast alloys resist oxidation and distortion over hundreds of pit furnace cycles.
- Cost-effective for large parts: No expensive metal die tooling — foam patterns are low-cost and easy to modify, making custom one-off furnace hardware economical.
- Custom to your furnace: Tell us the pit inner diameter, depth, and workpiece list — we design the fixture layout and quote within 2 working days.
Need a Custom Pit Furnace Fixtures and Hanging Racks?
Send us your drawing, part sample, or furnace dimensions — our engineers will recommend the optimal cast or fabricated solution and quote within 2 working days.