WhatsApp: +86 15921799893     E-mail:sales@slinord.com

Vacuum Furnace Material Trays

Precision investment cast vacuum furnace trays and baskets. Cr-Ni heat-resistant alloy (Cr25Ni20 / 253MA / 310S). Pin grids, hanging cups, ring holders — custom designed for your parts. Service up to 1300°C.
Quote: Negotiable
Process: Investment Casting (Lost-Wax / Precision Casting)
Material: Cr25Ni20 / 253MA (1.4835) / 310S / 1.4848
Operating Temperature: Up to 1100–1300°C
Configuration: Pin grid / Hanging cups / Ring holders / Multi-tier
Customization: Per workpiece & furnace chamber
MOQ: Negotiable
Product Details
Product Details

SLINORD manufactures vacuum furnace material trays and baskets — precision investment cast (lost-wax) fixtures that hold and support workpieces during vacuum heat treatment, vacuum brazing, and sintering. Cast from heat-resistant Cr-Ni alloys with intricate pin grids, hanging cups, and ring holder arrangements, our trays are engineered for maximum part loading density while maintaining uniform temperature and gas flow inside the vacuum chamber.

What Are Vacuum Furnace Trays?

Vacuum furnace trays are the load-bearing fixtures that sit inside a vacuum furnace chamber and hold the parts being heat-treated. Because vacuum furnaces operate at high temperatures (up to 1100–1300°C) with controlled atmosphere, the trays must be cast from heat-resistant alloy with complex geometries — pins for hanging parts, cups for holding small components, and ring holders for cylindrical parts — all produced as a single investment-cast structure with minimal welding.

Key Features

◇

Investment Cast Precision

Lost-wax casting produces intricate grid patterns, thin pins, and complex cup geometries as one piece — no weak weld joints.

♨

High-Temperature Resistance

Cr-Ni heat-resistant alloys retain strength and resist sagging at 1100–1300°C under vacuum.

◉

Optimized Part Density

Pin spacing, cup arrangement, and tier configuration are designed for maximum loading per batch.

⊘

Vacuum Compatible

Low-outgassing alloy and smooth cast surfaces prevent contamination of the vacuum chamber and workpiece.

Product Gallery

Pin grid tray

Pin Grid Tray

Vertical pin arrangement for hanging small parts, fasteners, and shafts.

Multi-tier cup tray

Multi-Tier Cup Tray

Multi-level hanging cups for holding small components during brazing.

Large basket tray

Large Basket Tray

Wide grid base with support posts for heavy workpiece loads.

Ring holder tray

Ring Holder Tray

Vertical tiers of circular holders for bearings, rings, and cylindrical parts.

Technical Specifications

ParameterSpecification
Product NameVacuum Furnace Material Tray / Investment Cast Basket / Heat Treatment Fixture
Manufacturing ProcessInvestment casting (lost-wax / precision casting) → shell assembly → stress relief → inspection
Standard MaterialsCr25Ni20; 253MA (1.4835); 310S equivalent; 1.4848; Inconel-type heat-resistant alloys (per requirement)
Operating TemperatureUp to 1100–1300°C (vacuum atmosphere, depending on alloy)
Typical Tray SizePer vacuum furnace chamber; typical 400×400 mm to 1200×1200 mm, custom
Configuration OptionsPin grid, hanging cups, ring holders, multi-tier stacks, custom per part geometry
Pin / Cup SpacingDesigned per workpiece dimensions — optimized for part fit and gas flow
Surface FinishAs-cast, shot-blasted; smooth surface for low outgassing
ApplicationsVacuum heat treatment, vacuum brazing, vacuum sintering, bright annealing, vacuum carburizing
IndustriesAerospace, automotive, tool & die, medical devices, cutting tools, powder metallurgy
CertificationISO 9001; material test certificate per EN 10204 3.1

Applications

  • Vacuum quenching and hardening furnaces
  • Vacuum brazing furnaces for aerospace and automotive components
  • Vacuum sintering furnaces for cemented carbide and powder metallurgy parts
  • Bright annealing furnaces for stainless steel and copper parts
  • Vacuum carburizing and low-pressure carburizing furnaces
  • Medical tool and cutting tool heat treatment

Why Choose SLINORD Vacuum Furnace Trays?

  • True investment cast: One-piece cast structure — no weak welds between pins and base.
  • Designed around your parts: Send us your workpiece drawing — we design pin spacing and cup arrangement for maximum batch density.
  • Vacuum-grade alloy: Low-outgassing, high-purity Cr-Ni alloys that won't contaminate your parts.
  • Stackable & modular: Multi-tier configurations that fit your furnace chamber dimensions.
  • Replacement cross-reference: Send us an old tray or drawing — we reverse-engineer and improve the design.

Need a Custom Vacuum Furnace Material Trays?

Send us your drawing, part sample, or furnace dimensions — our engineers will recommend the optimal cast or fabricated solution and quote within 2 working days.